CYLINDER HEAD SPECIFICS:
Intake Valve Diameter: 2.250
Exhaust Valve Diameter: 1.575
Combustion Chamber:
Volume: 33 to 55 c.c. Nitrous
Seats: Steel (or) Copper Beryllium
Minimum Bore: 4.125
Intake Manifold: MBE Ported Cast with MBE tapered spacer (or) Sheet Metal
Rockers: Jesel
Casting: Edelbrock
Complete Assemblies Available
DESCRIPTION:
MBE’s SB2.2 Special cylinder head is practically a clean-sheet design based on the Chevrolet’s SB2.2 architecture. Beginning with their own casting, MBE Cylinder Heads and Manifolds has created what can only be called “an SB2 on steroids.”
By raising both the intake and exhaust port runners a quarter of an inch and precisely controlling the cross-sectional area along the entire length of the ports, MBE has created an SB2 head with record-breaking flow numbers. We’re talking 450 cfm for the intakes and 292 for the exhausts—and remember, MBE is the only cylinder head specialist that guarantees its published port flow numbers.
Big flow requires big valves, and that’s certainly the case here. Each head is outfitted with big 2.250 inch diameter intakes and 1.575 exhaust valves. The chambers can be sized from 33 to 55 cc’s, and when combined with MBE’s custom ported cast manifolds, this combination will make more power than any other SB2 in a single-carb application. This is an excellent competition head for serious drag racers in the Comp Eliminator or similar classes.
//SB2.2 DRAG SPECIAL EDELBROCK
RAISED PORT
BASE PRICE $7,240.00 (Per Pair)
CONFIGURATION OPTIONS:
(additional to base price)
Intake Valves: Stainless $284 Titanium, $892
Exhaust Valves: Stainless $284 Titanium, $868
Seats: Included
Retainers: Titanium, $257.28
Locks: Titanium Locks, $252, Steel Locks, $52
Spring ID Locator, $94.40
Lash Caps, $208
Valve Seals, $24
Rockers: Jesel $3230
Coat Valves: (8) $334
CC & Deck, $180
Assembly, $140
Manifold: Intake, $865
Porting: $1900
Carb Spacers: 1, $175
Springs: Call
CONTACT US FOR A QUOTE BELOW,
OR CALL 704.856.0200:
You can also email us direct here
VISIT OUR FACEBOOK PAGE!